MuxLab will showcase new additions to its IP-based range of products for AV systems at the show, showcasing the HDMI/VGA/USB over IP PoE wall plate transmitter, the HDMI/Dante over IP PoE transmitter, the ProDigital Network Controller and the HDMI 2.0 extender kit.
The HDMI/VGA/USB over IP PoE wall plate transmitter will be shown, delivering HDMI, VGA and USB equipment at up to 4K (3840x2160) resolution at 30 Hz in a number of configurations over a local Ethernet IP network via an Ethernet switch. The transmitter can also fit into a standard two-gang Decora electrical box.
HDMI/Dante over IP Poe Transmitter, UHD-4K
The HDMI/Dante over IP PoE Transmitter, UHD-4K sends HDMI up to 4K@30Hz (4:4:4) and 4K@60Hz (4:2:0) with Dante audio to create an independently distributed network.
Depending on network bandwidth, hundreds of displays can be supported, with audio independently distributed to potentially hundreds of Dante audio devices.
ProDigital Network Controller
The ProDigital Network Controller allows users to auto-discover, configure and control connectivity through an Ethernet Web interface, with the controller able to be managed by MuxLab’s MuxControl App and the 500816-IP 8 Button IP PoE control panel.
HDMI 2.0 extender kit
The HDMI 2.0 extender kit delivers HDMI uncompressed up to 4K/60 (4:4:4) over a Cat6a/7 unshielded twisted pair cable in a point-to-point configuration at distances up to 30M at 4K/60, 40M at 4K/30 and 45M at 1080p.
The unit supports HDCP 2.2 and audio pass-through up to Dolby Atmos and DTS:X.
ISE 2020 will run from 11-14 February 2020 at the RAI Amsterdam, Amsterdam, The Netherlands.