Just Add Power will show MaxColor 4K60 transmitters and receivers when it exhibits at ISE 2022 in Barcelona on stand 5P600.
Also on show will be its 2GΩ/3G ST1 sound transceiver, Advanced Matrix Programmer (AMP) software for multicast and VLAN switching systems, and Warp Engine transmitter/receiver.
The MaxColor 4K60 Series transmitter and receiver provide integrators with an affordable and scalable 4K UHD distribution platform to support 4K source content natively with high frame rates over existing network infrastructures. MaxColor 4K60 offers video at 36-bit colour and true 4:4:4 chroma that can be distributed over existing Cat5/Cat6 cable. The series delivers seamless switching, 4K up- and downscaling and HDR management, while supporting lossless audio formats and HDR10, HLG and Dolby Vision. Additional features include image pop, push, pull and integrated control.
Functioning as an input or output, Just Add Power's ST1 is an audio-only component that allows integrators to add a stereo audio source to Just Add Power systems, or to extract stereo audio from an existing
transmitter. Any audio source with an analogue audio out can be connected and played on any receiver. As an audio output, the transceiver can play any stereo audio content from any Just Add Power device, while providing variable audio control.
For multicast switching, Just Add Power's AMP software is designed for environments with existing infrastructure or special network requirements that don't allow for a dedicated AV distribution switch. AMP consolidates and streamlines the process of setting up individual Just Add Power devices — discovering them on the local network, presenting them in a list, and allowing installers to name them, configure their IP addresses, and assign channels to transmitters — while assisting with updates when new firmware is released. Alternately, AMP will configure devices and the network switch when used to set up VLAN systems. Once the Just Add Power system is configured, AMP provides a user interface to control source switching.
With Just Add Power's Warp Engine transmitter, installers can rotate any HDMI source — such as cable boxes, media players, game systems and cameras — in a Just Add Power matrix in 0.1-degree increments in real time with low latency. The rotated image can then be sent to an unlimited number of receivers in the network, allowing for the creation of large videowalls using a single unit. Fully HDCP-2.2-compliant, the transmitter can be added to any Just Add Power 3G or 2GΩ/3G system running Just OS.
Just Add Power has also partnered with Purelink Europe as a new master distributor for the EMEA region. This partnership adds a mainland EU office and showroom for Just Add Power as well as providing distributors and dealers in the region with inventory that is available in two days or less.