EET Europarts demonstrates Vivolink products at ISE 2019

EET Europarts unveiled the Vivolink meeting up, splitter/scaler, adapter ring and cable management products.

The Vivolink meeting hub 4K 2x1 system for videoconferencing connects to a PC via an HDMI cable or USB. Equipped with a monitor, USB camera and USB table microphone/speaker; the system automatically activates when devices are connected and turns off when they are disconnected at the close of a meeting.

The Vivolink VLHDMISP1X4 HDMI 2.0 1x4 splitter/scaler works signals from 4K to 1080P, supporting HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4.

The HDMI input supports HDCP 2.2 protocol, downscaling of video resolution from 4K to 1080p and has 18 Gbps bandwidth.

The splitter/scaler also features EDID management with incorporated EDID settings, as well as an integrated equaliser for signal amplification.

The firmware can be updated via micro-USB port, with input and output resolution controlled through a DIP switch.

The Proadring 3C adapter ring is an HDMI + USB C/B adapter ring, featuring support for HSB-C to HDMI 4K/60, mini HDMI to HDMI 4K/60 and mini displayport to HDMI 1080p/60.  

The Vivolink premium cable management cable sleeve features a zipper at both ends to thread and gather cables from both parts, with each sleeve holding up to ten cables, featuring an anti-static, heat resistant internal membrane.

The sleeves can be washed and are available in sizes, including 0.8 metres, 2.5 metres, 4.5 metres and 6.5 metres.

Article Categories








Most Viewed

> >

>