German manufacturer eyevis is to show high-res LED modules with 1.5mm, 2mm and 2.5mm pixel pitch and a 4K/Ultra HD product range with displays up to 98in at ISE 2015.
Products to debut at ISE 2015 will include the wall-mountable rear-projection cubes with a depth of less than 422mm, the EPU-Wall system for installation and control of IP-based videowalls, OPS displays with integrated eyevis processing units, as well as the omniSHAPES with the eyeDesign software for layout, planning and installation of videowalls.
The Slim-Cubes have a depth of 422mm (50in, full HD) and can be placed directly in front of a wall as well as mounted directly on a wall without a substructure. Thanks to the complete front support and the case design there is no need for space behind the Cubes for a service-access or a support structure. This saves additional space and means the eyevis Slim Cubes can be employed in smaller control rooms, smaller TV studios and other areas where rear-projection cubes were not suitable thus far because of the space requirements.
eyevis has expanded its current range (31.5in, 60in and 84in) of Ultra HD-Displays with the additional model sizes of 58in, 85in and 98in. The displays feature a refresh rate of up to 60 Hz (58in and 85in), a colour space of up to 100% NTSC (85in) and a resolution of 3840×2160 pixels. All displays can be optionally equipped with multi-touch systems based on infrared.