Work Pro unveiled its array of sound reinforcement products at ISE 2019
Work Pro demonstrated its WSF 500CX and WSF 10 CX plus passive two way, full range projector speakers.
Designed for external applications, the 500CX is a 1000W low impedance speaker, while the 10 CX plus 300W speaker is available in low or high impedance, with a 120Wrms at 100V line transformer.
Both speakers incorporate horn-loaded 10-in transducers and 2.5-in voice coils in a bass reflex enclosure.
A 1-in exit compression driver is featured, as well as a 1.75-in voice coil and an 80 degree horizontal x 60 degree vertical horn.
Both speakers are available in either black or white fiberglass, with an aluminum grille and four pole electrical connection cables, entering the enclosure through a cable gland.
Work Pro also introduced its PA 8150 Class-D amplifier, featuring independent volume control on each of its eight channels.
Capable of delivering up to 150PW per channel, with a total power output of 1040W, the PA 8150 comes with short circuit, thermal, ultrasonic and RF protections and is able to fit into a 1HU 19-in rack.
The BlueLine range was also expanded, with two Dante Gateawys products: the DD2 and DD4.
The DD2 features two balanced inputs/two outputs, while the DD4 has four balanced inputs/fours output allowing for the extraction of analogue audio signals from the Dante network and the introduction of analogue channels in the same network.
The DD2 and DD4 are both configurable with the Dante controller, using Euroblock 3.5mm connectors.