Optocore develops network intercom for RTS

The 'V3R-FX-INTERCOM for RTS' and 'X6R-FX-INTERCOM for RTS' interfaces are a result of cooperation with the intercom manufacturer.

Based on Optocore’s V3R-FX / X6R-FX1U series architecture the devices are equipped with standard RJ45 interfaces. As a result of creating an intercom version based on these converters, the new intercom devices are also Line-In and Line-Out converters.

The V3R-FX-INTERCOM for RTS integrates seamlessly into the Optocore Optical Digital network system and intercom inputs can be routed to MADI, AES/EBU or Line outputs, with intercom messages and control data from RTS user panels or matrix sent transparently through the optical network. Each single intercom channel can be routed to every intercom device in the network via the Optocore control software.

One V3R-FX-INTERCOM can exchange up to 1024 intercom channels from the fibre network, 64 intercom channels from the SANE network and eight intercom channels from the I/O interfaces.

The X6R-FX-INTERCOM for RTS has similar architecture and features, but with eight ports (to Panel) and eight ports (to Matrix); one port can be used either to Panel or to Matrix — though not at the same time (for example Ports 1-4 may be connected to RTS panels and ports 5-8 to RTS Matrix).

Article Categories

Most Viewed

> >