22.07.16

Extron expands SoundField XD ceiling speaker line

extron sf 3ct lp composite ceiling speaker front and back view
Extron SF 3CT LP ceiling speaker

Extron Electronics has presented its SoundField XD Series SF 3C LP and SF 3CT LP of composite ceiling speakers.

The speakers feature a low profile composite back for use in plenum rated ceiling environments. The speakers feature a UL 2043 listed composite speaker enclosure to ensure they meet UL requirements for smoke and heat release in plenum air spaces.
 
Their redesigned 3i (7.6cm) full-range driver offers a frequency range of 65 Hz to 20 kHz and has a wide conical dispersion of 165-degrees.

Designed for 8 ohm direct connection to power amplifiers, the SF 3C LP features a 4-in (10.2 cm) low profile back and allows operators to wire speakers in parallel for 4 ohm amplifier operation. It allows both direct 8 ohm or 70/100 volt operation with a behind-the-grille, 6-position power selector switch.

The SF 3C LP and SF 3CT LP have a two-piece modular design with a separable back can and baffle for ease of installation. Each model features a cable/conduit access plate that can be used for side mount, for low clearance ceilings, or for top mount for blind-mounting into drywall ceilings. Their Opti-Torque indicator rings shows when the locking arm screws have been tightened. Both models incorporate a thin-edged round bezel and magnetic grille.

The SF 3C LP and SF 3CT LP from Extron are sold in pairs.