Clear-Com ships 2.4 GHz intercom

Clear Com DX410 Group

Clear-Com is shipping its DX410, two-channel 2.4 GHz digital wireless intercom system that features 7 kHz wideband audio.

TheDX410 also features lightweight yet rugged belt packs and all-in-one wireless headsets. Each BS410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 All-in-One wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while three users may be in full-duplex mode in a dual-channel operation. The BP410 and WH410 have rugged, reinforced casings and long-lasting keypads with no mechanical switch. Fast charging Li-Ion batteries takes only 2.5 hours to provide up to 12 hours of battery life. 

It also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. Two-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems. 

The DX410 uses a frequency hopping system (FHSS), and offers spectrum-friendly and Adaptive Frequency Hopping (AFH) modes, to avoid interference with Wi-Fi, while operating in the 2.4GHz band means that DX410 does not require radio licensing for use.