Clear-Com at IBC 2015 to introduce DX410 wireless intercom

AUTHOR: Inavate

Clear-Com has introduced the DX410 Wireless Intercom system at IBC 2015. It is a two-channel 2.4GHz digital wireless system featuring 7 KHz wide band audio for audio clarity.

DX410 is the first DX Series system to offer 7 KHz wideband audio, and also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems.
The BP410 wireless beltpack and WH410 All-In-One wireless intercom headset offer an extended battery life of up to 12 hours use on the 410 beltpack and All-in-One headset.
Each DX410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 All-in-One wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while three users may be in full-duplex mode in a dual-channel operation.
Operating in the 2.4GHz band means that DX410 does not require radio licensing for use. DX410 is a frequency hopping system (FHSS), and offers spectrum-friendly and AFH (Adaptive Frequency Hopping) modes, in order to avoid interference with WiFi.