Clear-Com 7kHz intercom system

ClearCom DX410 wireless intercom system

Clear-Com’s DX410 two-channel 2.4 GHz digital wireless intercom system features 7 kHz wideband audio.

Each BS410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 All-in-One wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while three users may be in full-duplex mode in a dual-channel operation. DX410 also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems. 

The 7 kHz wideband audio expands audio range and increases intelligibility in high RF environments. The system also has upgraded radio and a lost packet concealment capability. 

Highly durable and light-weight, the DX410 belt pack and All-in-One wireless headset are designed to withstand long periods of usage and tough production environments. 

The BP410 and WH410 have rugged, reinforced casings and keypads with no mechanical switch. The same Li-Ion battery for the BP410 and WH410 takes 2.5 hours of charging to provide up to 12 hours of battery life. 

DX410 uses a frequency hopping system (FHSS), and offers spectrum-friendly and Adaptive Frequency Hopping (AFH) modes, to avoid interference with Wi-Fi, while operating in the 2.4GHz band so does not require radio licensing for use.